Made per model, not one-size-fits-all
Every set is made against a specific MAP model and length rather than a generic size, so each bung seats on the section it was made for. Order against the entry that matches your pole.
MAP Pole Bungs
MAP build the TKS G-series around a graphene-modified resin impregnated into the carbon, which is how they get a pole that is robust without feeling heavy in the hand. The range runs from short margin poles through to 16 m match poles, and MAP fit each top kit with a depth-marker print, a long PTFE bush and a side roller puller as standard.
Fox Worx makes bungs for the TKS G1, G2 and G3 margin poles at 10 m, and the TKS G10 at 13 m, G20 at 14.5 m, and the G30, G40, G50 and G60 at 16 m. Sets are made against the model and length in the table below.
MAP poles we make bungs for
Fox Worx currently makes pole bungs for 9 MAP models, covering the TKS G-series. Match your pole to the exact model and length below.
| Model | Length |
|---|---|
| TKS G1 | 10 m |
| TKS G2 | 10 m |
| TKS G3 | 10 m |
| TKS G10 | 13 m |
| TKS G20 | 14.5 m |
| TKS G30 | 16 m |
| TKS G40 | 16 m |
| TKS G50 | 16 m |
| TKS G60 | 16 m |
Can’t see your MAP pole? We add models all the time — Send us the make, model and year of manufacture. We’ll look at adding it.
Why exact-model fit matters on MAP poles
No adhesive needed
Because the fit is exact to each section, nothing needs gluing in. That also means a bung can be removed again without leaving residue on an expensive pole.
Numbered by section
Each bung carries an engraved number in its base so a set can be fitted in order. The fitting guide covers the full method.
Colours for MAP poles
Every set comes in a subtle smoke grey or a range of striking colours chosen to complement your pole’s accent colours. Bright colours make section ends easy to locate; smoke keeps a low profile. See the full colour range.
MAP pole bung FAQ
Which MAP poles are covered?
The TKS G1, G2 and G3 at 10 m, the TKS G10 at 13 m, the TKS G20 at 14.5 m, and the TKS G30, G40, G50 and G60 at 16 m.
Do you cover older MAP poles?
The listed TKS models are what we currently produce. If you run an earlier MAP pole, send us the make, model and year of manufacture and we will look at adding it.
Pole bungs for other brands
Protect your MAP sections
Confirm your model above, then follow the official fitting method so each bung seats correctly first time.