Made per model, not one-size-fits-all
Every set is made against a specific Maver model and length rather than a generic size, so each bung seats on the section it was made for. Order against the entry that matches your pole.
Maver's MV-R poles sit at the sharp end of their range. The MV-RXX is built on an 18mm mandrel using M9 carbon, a material Maver take from windsurfing for its resistance to wind and hard-fighting fish, with the MV-RXS Pro carrying the same approach in M8 carbon and Maver's AFS finish. A full set of sections at this level is a serious investment to protect.
Fox Worx makes bungs for the MV-RXX, MV-RXS and MV-RXS Pro at 16 m. Order against the exact model in the table below.
Fox Worx currently makes pole bungs for 3 Maver models, covering the MV-R series. Match your pole to the exact model and length below.
| Model | Length |
|---|---|
| MV-RXS | 16 m |
| MV-RXS PRO | 16 m |
| MV-RXX | 16 m |
Can’t see your Maver pole? We add models all the time — Send us the make, model and year of manufacture. We’ll look at adding it.
Every set is made against a specific Maver model and length rather than a generic size, so each bung seats on the section it was made for. Order against the entry that matches your pole.
Because the fit is exact to each section, nothing needs gluing in. That also means a bung can be removed again without leaving residue on an expensive pole.
Each bung carries an engraved number in its base so a set can be fitted in order. The fitting guide covers the full method.
Every set comes in a subtle smoke grey or a range of striking colours chosen to complement your pole’s accent colours. Bright colours make section ends easy to locate; smoke keeps a low profile. See the full colour range.
The MV-RXX, MV-RXS and MV-RXS Pro, all at 16 m.
Not yet. Send us the make, model and year of manufacture and we will look at adding it.
Confirm your model above, then follow the official fitting method so each bung seats correctly first time.